Single Chain Straight Line Cold Drawing Machine
Specification of Cold Drawing Machine
1, Chain drawing machine (pipe drawing) product overview:
Product application: This equipment is suitable for drawing (drawing, cold drawing, polishing, drawing, twisting, straightening, drawing, hexagon rectangle, etc.) of metal tube (bar).
Mechanical layout: chain drawing machine
Equipment brand: Fangrong Taiwan brand drawing machine technology
2, Operation mode of chain drawing machine (pipe drawing machine):
After one end of the material is shrunk (indenter), it is held by human hand and extended into the central frame of the drawing machine. After being pneumatically clamped, the chain is hooked by the chain and drawn. When drawing, the vibration of the machine body is required to be small, the drawing speed is uniform and stable, and the best precision of the finished product after drawing is achieved, and the uniform surface of the finished product is smooth and good quality. Generally, the above requirements are reached after drawing.
3, Performance of chain drawing machine (pipe drawing machine):
A. Drawing form 1 line drawing E. center height 830mm
B, Tensile force 120KN F. maximum processing range: Ф 40mm, wall thickness: 3.5mm
C. Tensile speed 12m / min g. effective length of core pulling (propeller length) 8M
D. Tensile length 9000m
4, Chain drawing machine (pipe drawing) machine configuration:
A. Type: variable frequency speed regulation 45KW main motor 37KW trolley reduction motor 2.2kW speed ratio 15:1
B. Output: 189n. M
C. Speed: 1320-132r / min
D. Power supply voltage: 380V 50-60Hz
5, Driving part of chain drawing machine (pipe drawing machine):
A. Frame: channel steel and flat steel 30 * 40 welded square steel 35 * 35 rail
B. Chain: 3 "Taiwan chain
C. Sprocket shaft: Ф 80
Technical Parameter of Cold Drawing Machine
| Item |
Description |
Spec and figure of drawing machine |
| LBJ-D30 |
| 1 |
Rated drawing length (m) |
12.5 |
| 2 |
Rated drawing speed (m/min.) |
12 |
| Speed adjusts range (m/min.) |
0~18 |
| 3 |
Rated drawing force (KN) |
300 |
| 4 |
Main drive |
| Motor type |
Y315S-6 |
| Motor power (Kw) |
75 |
| Motor speed (rpm) |
990 |
| Motor brand |
Nanjing Kote |
| Type of gear reducer |
ZS145 |
| Brand |
Jiangsu Taixiang |
| 5 |
Main transmission chain |
| Pitch (mm) |
180 |
| Chain plate (mm) |
16×120×310 |
| Material of chain |
65Mn |
| Material of chain pin |
40Cr |
| 6 |
Drawing car |
| Drawing car return motor |
Y132S-6 |
| Car return speed (m/min) |
40 |
| Motor power (kw) |
3 |
| Type of clamping and drop-hook |
Mechanical |
| 7 |
Automatic mandrel |
| Motor type |
Y132M1-6 |
| Power of motor(kw) |
4 |
| Speed (m/min) |
60 |
| 8 |
Weight of main machine (ton) |
About 24 ton |
| 9 |
Price of raw material stacking table and finished product collecting stack (USD) |
7,500.00 |
| 10 |
Weight of Item 10 (ton) |
About 3 ton |
| 11 |
Overall length: more than 40m; longest single piece: 8m |
| Model |
Rated drawing force(T) |
Maximum clamp diameter(mm) |
Maximum reduction rate(%) |
Main chain pitch(p) |
Main chain bar size (height × thickness) |
Trolley return speed(m/min) |
Main motor power(KW) |
Reducer model |
Effective length of drawing(mm) |
| LW5 |
5 |
Ф25 |
20% |
78.18 |
45×10 |
55 |
11 |
ZQ500 |
8 |
| LW10 |
10 |
Ф32 |
25% |
103.2 |
60×13 |
55 |
30 |
ZQ750 |
10 |
| LW15 |
15 |
Ф40 |
25% |
160 |
100×10 |
60 |
45 |
ZQ850 |
10 |
| LW20 |
20 |
Ф45 |
25% |
180 |
120×16 |
60 |
55 |
ZQ1000 |
10 |
| LW30 |
30 |
Ф50 |
20% |
180 |
120×18 |
60 |
75 |
ZQ1250 |
10 |
| LW45 |
45 |
Ф60 |
20% |
220 |
140×18 |
60 |
90 |
ZQ1450 |
10 |
| LW60 |
60 |
Ф80 |
20% |
250 |
150×20 |
55 |
110 |
ZQ1650 |
10 |
| LW80 |
80 |
Ф90 |
20% |
260 |
150×25 |
55 |
132 |
QJS-D-710 |
10 |
| LW100 |
100 |
Ф100 |
18% |
300 |
180×30 |
50 |
132 |
QJS-D-800 |
10 |
| LW120 |
120 |
Ф120 |
18% |
320 |
200×30 |
50 |
160 |
QJS-D-900 |
10 |
| LW150 |
150 |
Ф130 |
18% |
350 |
210×32 |
50 |
200 |
QJS-D-1000 |
10
|
Product Tags:
|
|
Single Chain Straight Line Cold Drawing Machine Images
|
