Small Diameter Locking Ring V Band Clamp Cold Roll Forming Machine
Product Application
This kind of roll forming machine uses stainless steel as raw material, through decoiler, straightening, roll forming and cutter processes, it can produce all kinds of clamping rings.
Frequency converter controls motor speed, PLC system automatically controls length and quantity, realizes continuous automatic production, and is an ideal equipment in cold roll forming industry.
Machine Parameters
| No | Items | Technical Requirements |
| 1 | Production Process | De-coiler --- Leveling --- Roll Forming --- Rolling Head --- Cut off |
| 2 | Floor Area | 15×2.5×2(L×W×H)M |
| 3 | Feeding Direction | From Left to Right |
| 4 | Voltage | 380V,50Hz,3 Phase |
| 5 | Air Supply | Flow Rate:0.5m³/min; Pressure: 0-0.7MPa |
| 6 | Hydraulic Fluid | 46# |
| 7 | Gear Oil | 150# |
| 8 | Material of Strip | Stainless Steel |
| 9 | Width of Strip | ≤80mm |
| 10 | Thickness of Strip | ≤2.8mm |
| 11 | Speed | 10 components per minute for diameter 378mm 15 components per minute for diameter 248mm 20 to 25 components per minute for diameter 115.8 to 127.4mm 20 to 25 components per minute for diameter 127.4 to 155.8mm 20 to 35 components per minute for diameter 72.6 to 148.8mm |
| 12 | Length Tolerance | ±0.25mm |
| 13 | Total Power | Around 25 KW |
Main Devices of Roll Forming Machines
| No | Items | Model | Qty | Remark |
| 1 | De-coiler and Straightening Combine Device | LS-300F | 1 set | |
| 2 | Roll Forming Device | | 1 set | |
| 3 | Guarding Cover | | 1 set | |
| 4 | Control System | | 1 set | |
Electric Elements Brand
| No | Items | Brand | Remark |
| 1 | PLC | OMRON | |
| 2 | HMI | WEINVIEW | |
| 3 | Electric Elements | Schneider | |
| 4 | Bearing | NSK | |
| 5 | Main Motor | YASKAWA Servo Motor | |
| 6 | Digital Position Display | SIKO | |
Technical Configuration
| No | Items | Technical Parameters |
| 1 | De-coiler and Straightening Combine Device | Width of Strip | 30-100mm； |
| Thickness of Strip | ≤3.5mm； |
| Inner Diameter of Coil | ф480-520 mm(according to customer’s requirements)； |
| Outer Diameter of Coil | φ1300mm；Loading Weight:≤2T |
| Expand Way | Manual |
| Power | De-coiler no power |
| Width of Strip | 30-100mm； |
| Thickness of Strip | ≤2mm； |
| Motor Power | 3 KW (straightening power) |
| Speed | Max16m/min |
| Roller Arrangement | 7 rollers |
| Arrange mode | 4-Point Independent |
| 2 | Roll Forming and Cutting Device | Forming Stations | 8 Stations |
| Type of Driven | Gear |
| Forming Rack: | High strength guide pillar gantry horizontal frame. The slider rollers are adjusted by digital display. |
| Station Pitch | 250mm |
| Max. Feeding Width of Coil | 100mm |
| Max. Thickness of Material | 3.5mm |
| Diameter of Shafts | Φ60mm ,42CrMo (quenching and tempering) |
| Material of Roller | Cr12,Hardness: HRC58-60° |
| Main Driven Motor | 11KW(Servo Motor) |
| Bending and Cutting Devices | 1 set |
Guide Roller Device
Accurate introduction of the first forming wheel, with digital display, detection of head and tail of coils.
Lubrication system
The lubrication system for segment forming will be self-contained within the machine. The excess lubrication from the forming process will be re-circulated, filtered and re-used.
Special Gear Boxes Device
We optimized it and added a gearbox. The gears are in the gearbox to ensure sufficient lubrication, higher transmission accuracy and lower noise. The length accuracy we can achieve now can be guaranteed within 0.5mm.
Rolling Head of V Band Clamps Forming Machine
Control System
There are manual/automatic operation modes. It has manual and automatic switching function: under manual state, it can be operated on a single machine for easy maintenance; under automatic state, it can be operated on the whole line and started sequentially; with emergency stop button, it is easy to deal with emergencies and ensure the safety of equipment and operators.
Manual operation panel beside the machine is convenient for workers to operate.
FAQ
Q: What’s the diameter range your roll forming machine can do for clamps?
A: Min. diameter is 55mm, the max. diameter is 800mm.
Q: What products can this machine produce?
A: Auto V-band Clamps, ring clamps, G coulpings, Flanges, Gaskets, Aircraft Clamps
Q: What is the production speed?
A: Our company adopts servo motor, the speed can be controlled, according to the material thickness and diameter of the product, all of which can meet the requirements of customers.
Q: What are the advantages?
A: This roll forming machine we developed the latest technology to produce clamps, through one-time roll forming to complete, instead of the previous use of punch and other processes.
Product Tags:
|
|
Small Diameter Locking Ring V Band Clamp Cold Roll Forming Machine Images
|
